Spendor/思奔达 SP1/2R2 书架式音箱
 

The Spendor SP1/2R2 offers a unique blend of audio quality, tonal accuracy, razor sharp stereo precision and craftsmanship. A product derived from many years of development in drive units, crossovers and cabinetry. A speaker which wears it's heritage with pride.
Directly descended from the much praised and critically acclaimed Spendor BC1, the SP1/2R2 maintains the former's dimensions and uncanny mid and upper range accuracy at far higher sound pressure levels, with increased sensitivity, closer control of bass frequencies and lower mid-band colouration.
It effortlessly meets the challenge set by infinitely variable listening conditions and offers consistent, faithful and neutral sound reproduction.
•
Spendor 21cm drive unit with phase correction design
•
Copper shielded midrange pole for low distortion
•
High grade crossover network with gold conductors
•
Silver plated pure copper internal cables throughout
•
Gold plated binding posts on the rear
•
Temperature stabilised rubberised cabinet damping pads
•
Classic thin-wall design to reference standardsDescription
3-way stand mounting loudspeaker
Enclosure type
Reflex
SHF drive unit
22mm wide-surround dome with fluid cooling
HF drive unit
38mm soft dome with copper shaded pole
LF drive unit
Spendor 210mm polymer cone
Sensitivity
88dB for 1 watt at 1 metre
Crossover point
2.8 kHz, 13 kHz
Frequency response
55 Hz to 20 kHz ± 3dB anechoic
Typical in-room response
-6dB at 45 Hz
Impedance
8 ohms nominal
Impedance minimum
7 ohms
Power handling
150 watts unclipped programme
Terminals
Gold 2/3 way binding posts bi-wired
Cabinet (HxWxD)
635 x 300 x 300mm
Finish
cherry
Weight
18 kg each
Stand height
350-450mm (not supplied)

本公司有批发、代售、回收等业务，常期收购、寄售全新或二手音响器材，如一手用家有无修磨进口机器，请联系我们：13798118678  钟先生